Database

Factsheet 4: Tracer-Based-Sorting mit Fluoreszenz-Tracern - Effizientes und flexibles Sortieren von Kunststoffverpackungen

janna.vakili@ecologic.eu — Thu, 15 Apr 2021 07:21:07 +0000

Factsheet 4: Tracer-Based Sorting with Fluorescent Tracers - Efficient and flexible sorting of plastic packaging janna.vakili@e… Thu, 04/15/2021 - 09:21

Titelbild

Beschreibung

The German Packaging Act calls for a significant increase in recycling rates for plastics. In order to be able to produce high-quality recyclates, plastic articles must be separated by type. However, there is currently a lack of satisfactory identification options for the many different plastics.

This is where the technology from MaReK comes in. The joint project successfully developed a detection system using fluorescence tracers, which can significantly improve the sorting and recycling of plastic packaging in the sense of a circular economy.

The fourth factsheet presents the technology, its application areas and its relevance in further detail. It is available here as a PDF download.

Attachments

Factsheet 4 of the BMBF Research Focus Plastics in the Environment.

Joint project

MaReK

Year

2021

Author

Jörg Woidasky

Claus Lang-Koetz

Johannes Gasde

Jochen Moesslein

Authors

Type of Result

factsheets

Citation

Woidasky, Jörg; Lang-Koetz, Claus; Gasde, Johannes, Moesslein, Jochen (2021): Tracer-Based Sorting with Fluorescent Tracers: Efficient and flexible sorting of plastic packaging. Fact sheet 4 of the BMBF research focus „Plastics in the Environment“.

MicroCatch_Balt

KALEH — Wed, 20 Dec 2017 09:57:04 +0000

MicroCatch_Balt KALEH Wed, 12/20/2017 - 10:57

Investigation of Sinks and Sources of Microplastics from a Typical Catchment Area to the Open Baltic Sea

This project determined sources and sinks of microplastic in the Warnow river basin, as well as relevant dissemination processes on its way to the open Baltic Sea. Separate models were linked so that the resulting model covers the entire river basin including estuary and coastal waters. The linked models served to identify hotspot areas of microplastic entry and to estimate the effects of microplastic reduction measures in parts of the river basin. By converting the models into a handson multitouch table, project participants made interactive, creative learning modules that were presented in the form of a traveling exhibition in communities around the German Baltic coast from Stralsund to Flensburg. Further, MicroCatch_Balt included the examination of anti-fouling paint and extreme weather events as sources and higher organisms as sinks. Based on this, MicroCatch_Balt covered the most important aspects of microplastic contamination of limnic to marine systems in northern Germany, thereby offering interest groups the expertise with which to develop future monitoring and strategies for reduction.

Main areas of work

Sampling in the Warnow river basin and estuary, extraction and identification of microplastics
Modelling of microplastic input into the Warnow system of diffuse and point sources
Development of two multi-media modules for a multi-touch table and organisation of a traveling exhibition

Arbeitspakete

Work packages

WP 1 Sampling of microplastic from the environment

Contact person
PD Dr. habil. Matthias Labrenz, Leibniz Institute for Baltic Sea Research, Environmental Microbiology, Seestraße 15, 18119 Rostock, e-mail: matthias.labrenz@io-warnemuende.de

Project partner
IPF

Short description
In WP 1, environmental samples (water, sediment, soil, benthic and pelagic higher organisms) were collected, processed and identified in the Warnow area. Of particular interest were potential sources such as wastewater treatment plants / sewage separation, drainage ditches, erosion areas, industrially influenced areas as well as extreme events like Hanse Sail, New Year‘s Eve, heavy rain and storm events. Potential sinks, including higher organisms (mussels, worms, fish), beaches and sediments were also sampled. In all samples, the microplastic particles were identified and quantified using spectroscopic methods.

WP 2 Modelling of the Warnow estuary and the catchment area

Contact person
Dipl.-Ing.agr. Peter Kreins, Johann Heinrich von Thünen Institute - Federal Research Institute for Rural Areas, Forestry and Fisheries, Bundesallee 50, 38116 Braunschweig, e-mail: peter.kreins@thuenen.de

Project partner
FZJ, IOW

Short description
By adapting and combining different regional models, spatially high-resolution modelling of landside diffuse and point source of microplastic emissions into the river basin of the Warnow took place. In this way, on the one hand the hotspots of pollution in the Warnow river area were identified and on the other hand the entire landside microplastic entries into coastal waters were quantified.

WP 3 Microplastics Touring Exhibition

Contact person
Dr. Barbara Hentzsch, Leibniz Institute for Baltic Sea Research Warnemünde, Scientific Management and Communication, Seestraße 15, 18119 Rostock, e-mail: barbara.hentzsch@io-warnemuende.de

Project partner
FhIGD

Short description
In WP 3 a traveling exhibition with an interactive multimedia learning module was developed, which presents the project results in the form of animations. The traveling exhibition was shown in Stralsund, Rostock, Hamburg, Kiel, Eckernförde and Flensburg. The respective exhibition openings was accompanied by plenary discussions with representatives of the local environmental authorities and scientists.

WP 4 Project management

Contact person
PD Dr. habil. Matthias Labrenz, Leibniz Institute for Baltic Sea Research, Environmental Microbiology, Seestraße 15, 18119 Rostock, e-mail: matthias.labrenz@io-warnemuende.de

Short description
WP 4 covered project management and ensured efficient and productive execution of the project. The tasks of WP 4 included coordination with the other “Plastics in the Environment” projects PLAWES, PLASTRAT and the BONUS project MICROPOLL, as well as monitoring finances and work results, organising regular project meetings, disseminating project results to the public, and supporting the project manager with regard to internal and external scientific communication.

Coordinator

PD Dr. habil. Matthias Labrenz
Leibniz Institute for Baltic Sea Research Warnemünde / IOW,
Environmental Microbiology
Seestraße 15
18119 Rostock
Phone: +49 381/5197378
e-mail:matthias.labrenz@io-warnemuende.de

Website

https://www.io-warnemuende.de/microcatch-home.html

Partner Institutions

Leibniz Institute of Polymer Research Dresden / IPF

Jülich Research Centre, Institute for Bio- and Geosciences / FZJ-IBG

Johann Heinrich von Thünen Institute - Federal Research Institute for Rural Areas, Forestry and Fisheries / TI-LR

Fraunhofer Institute for Computer Graphics Research IGD Rostock / FhIGD

Duration Period

August 2017

April 2021

PLASTRAT

KALEH — Tue, 19 Dec 2017 14:34:18 +0000

PLASTRAT KALEH Tue, 12/19/2017 - 15:34

Strategies for Reducing the Entry of Urban Plastics into Limnic Systems

The common element of all investigations in PLASTRAT was the development of solution strategies for sustainable limitation of the spread of plastic residues in the aquatic environment on technical, environmental, scientific and social-ecological levels. The objective consisted of developing a multi-criteria evaluation approach for the environmental compatibility of different types of plastics. In addition, a quality label for practical application was designed. The focus lay on the analysis and evaluation of the degradation stages of different types of plastics as well as leaching, adsorption and desorption in different wastewater treatment stages, the effects of different plastic species (in different degradation stages) and their additives on aquatic organisms in limnic systems, as well as a risk characterisation of the human toxicological effect of microplastics on consumers of drinking water. Furthermore, the emphasis is put on the quantification and technical reduction potential (e.g. use of membrane technology) of plastic emissions in urban water management, including sewage sludge/fermentation residue treatment, taking into account suitable sampling, treatment and analysis methods. Besides, studies were carried out on the social relevance, i.e. how plastics are handled in German households, what demands the consumer places on plastics, what possibilities exist for the use of substitutes and the resulting effects on commerce, logistics and consumers.

Main areas of work

Determination and evaluation of microplastic pathways in limnic systems
Investigation and evaluation of technical measures for microplastic elimination
Sampling strategies for further processing and analysis of microplastics
Sample preparation for analysis of microplastics
Identification and quantification of microplastics in all samples
Automation of particle recognition, measurement and identification using databases
Adsorption/desorption of pollutants on microplastics
Degradation and leaching of polymers of different groups
Ecotoxicological studies of released substances from microplastics
Human toxicological investigations of released substances from microplastics
Risk analysis of drinking water
Investigation of societal relevance
Development of a multi-criteria evaluation system
Development of a quality label through an accompanying stakeholder dialogue

Arbeitspakete

Work packages

WP K Coordination und Communikation

Contact persons
Prof. Dr.-Ing. Christian Schaum, apl. Prof. Dr.-Ing. Steffen Krause, Bundeswehr University Munich, Institute of Hydroscience, Chair of Sanitary Engineering and Waste Management, Werner-Heisenberg-Weg 39, 85577 Neubiberg, e-mail: swa@unibw.de

Short description
In addition to the tasks of general scientific project management, internal communication between the network partners and external communication (increasing public awareness of the project) were also covered. This includes, among other things, uniform guidelines for public relations work by individual network partners and within the overall consortium, organisation of meetings, monitoring of work progress, document management and coordination of the associated partners.

WP 1 Microplastics in the urban water cycle

Project partner
UF, IWW, BfG, a2i, TUDa, inge, IPF, IOW

Short description
Basic data and definitions for PLASTRAT were specified in consultation with all project partners. This relates to the definition of the upper and lower limit of the particle size for microplastic particles to be examined, the selection of specific plastic species from the categories conventional plastics, recyclates, and biobased or biodegradable polymers. Further work included the selection or determination of suitable sites for investigations of WP 2 and 3, taking into account the products considered in WP 5. In addition, a stakeholder analysis was carried out along with a more detailed evaluation for developing the quality label.

WP 2 Degradation und material dynamics

Contact person
Prof. Dr. Thomas Ternes, German Federal Institute of Hydrology (BfG), Am Mainzer Tor 1, 56068 Koblenz, e-mail: ternes@bafg.de

Project partner
UniBwM, TUDa

Short description
The environmental behaviour of biobased, synthetic and recycled plastics was analysed in WP 2. Original materials were examined, as well as artificially-aged materials. The release of pollutants (oligomers, additives and their transformation products) was analysed depending on the type of polymer and the degree of degradation. Furthermore, differences in the adsorption/desorption of environmental chemicals were investigated for different types of polymers and the role of wastewater treatment plants regarding the pollutant load of microplastics (enrichment or depletion).

WP 3 Entry points and elimination

Project partner
UniBwM, a2i, inge, IPF, IOW

Short description
Different entry points of microplastics into limnic systems were assessed, focusing on the analysis and evaluation of the waste water management system including measures for microplastic retention (e.g. membrane technology) that already exist or have been modified or developed in the course of the project. Core areas comprised rain and mixed water discharge, the assessment and evaluation of the entire wastewater treatment plant system, and an analysis of sewage sludge, digestate and compost as possible microplastic sinks. Emphasis was also put on the development and selection of suitable processing and analytical methods.

WP 4 Impact and hazard analysis

Contact persons
Prof. Dr. Jörg Oehlmann, Dr. Ulrike Schulte-Oehlmann, Goethe University Frankfurt, Max-von-Laue-Straße 13, 60438 Frankfurt, e-mail: oehlmann@bio.uni-frankfurt.de

Project partner
IWW

Short description
Comparative analyses were conducted for biobased, synthetic and recycled plastics in different degradation stages as well as for their additives and substances adsorbed/desorbed regarding their effects applying various human and ecotoxicological methods. The results were used to derive threshold values and environmental quality objectives. These contributed to the hazard analysis and evaluation of the different plastic species with regard to their relevance and environmental compatibility for the limnic environment. The experimental investigations were supplemented by a risk analysis of the drinking water system.

WP 5 Societal relevance

Contact person
Dr. Immanuel Stieß, ISOE - Institute for Social-Ecological Research, Hamburger Allee 4, 60486 Frankfurt, e-mail: stiess@isoe.de

Short description
The social perception, use and disposal of plastic based products were analysed as well as the possibilities, conditions and obstacles for more sustainable consumption and disposal practices. The focus lay on applications in the non-food sector (hygiene articles, clothing and dog excrement bags) as their incorrect or informal disposal can lead to the emission of microplastics into limnic systems that may have negative effects on organisms and aquatic ecosystems. Analysing of the perception of environmental risks and product-specific use and disposal practices was carried out through qualitative exploration and standardised surveys.

WP 6 Evaluation system/quality label

Contact person
Kristina Wencki, IWW Rheinisch-Westfälisches Institute for Water Research gGmbH, Moritzstraße 26, 45476 Mülheim an der Ruhr, e-mail: k.wencki@iww-online.de

Project partner
ISOE, UniBwM, UF, BfG

Short description
Within the project, a multi-criteria evaluation system for plastics regarding to their environmental compatibility with limnic systems was developed. At the same time, the identification of the evaluation criteria was used to initiate the critical discourse about the quality label that demonstrates this environmental compatibility. To this end, a stakeholder dialogue was conducted. In addition to synthesizing the outcomes of the preceding work packages, this made a significant contribution to transfer the newly acquired findings into research and business practice.

Coordinator

Prof. Dr.-Ing. Christian Schaum and apl. Prof. Dr.-Ing. Steffen Krause
Bundeswehr University Munich Institute of Hydroscience /
UniBwM Chair of Sanitary Engineering and Waste Management
Werner-Heisenberg-Weg 39
85577 Neubiberg
Phone: + 49 89-6004-2061 bzw. -2698 /-3849
e-mail: swa@unibw.de

Website

http://www.plastrat.de/project/

Partner Institutions

Goethe University Frankfurt / UF

Institute for Social-Ecological Research/ISOE

IWW Rheinisch-Westfälisches Institute for Water Research gGmbH / IWW

German Federal Institute of Hydrology (BfG) / BfG

aquadrat ingenieure GmbH / a2i

Technical University of Darmstadt, Institute IWAR /TUDa

inge GmbH /inge

Leibniz Institute of Polymer Research Dresden / IPF

Leibniz Institute for Baltic Sea Research Warnemünde / IOW

Associated Partners

Münchner Stadtentwässerung

Stadt Weißenburg in Bayern

Entsorgungsbetriebe der Landeshauptstadt Wiesbaden

Stadt Weiterstadt, Eigenbetrieb Stadtwerke

Gemeindliche Einrichtungen und Abwasser Holzkirchen

Autobahndirektion Südbayern

CARAT GmbH

PlasticsEurope Deutschland e.V.

Kelheim Fibres GmbH

DWA Landesverband Bayern

Technical University of Munich, Analytical Chemistry

The Sustainable People GmbH

Duration Period

September 2017

December 2020

RAU

KALEH — Tue, 05 Dec 2017 13:35:24 +0000

RAU KALEH Tue, 12/05/2017 - 14:35

Tyre Wear in the Environment

Plastics in the environment are an increasingly serious challenge. As macroplastics deteriorate, such as through tire abrasion, the resulting microplastics can enter the aquatic environment through a variety of entry points. As vehicle traffic increases, there is an inevitable increase in microplastics from worn tires ending up in the environment. The amount of tire abrasion and the resulting microplastics entering the aquatic environment via road runoff had not yet been sufficiently researched.

The joint research project RAU addressed this and comprehensively described tire particles throughout the useful service life of tires, closing the knowledge gaps on where particle loss occurs over the entire life cycle. The goal was to identify and assess the entry points of tire materials into the aquatic environment and to develop reduction measures. RAU then verified selected measures for reducing the emission of tire material into the aquatic environment. On the basis of various influencing factors, an evaluation matrix was developed for deriving the most suitable measures to reduce tire abrasion in different locations.

Key areas of work

Development of a sampling basket for fractional sampling of individual rain events
Analytical evaluation of environmental samples for tire abrasion
Measurement of abrasion, quantification of subsets and subsequent qualitative examination
Further development of the pollution load simulation
Optimise the street cleaning

Coordinator

Prof. Dr.-Ing. Matthias Barjenbruch
and Daniel Venghaus

Technical University of Berlin,
Institute for Civil Engineering,
Faculty VI Planning Building Environment,
Institute of Civil Engineering,
Chair of Urban Water Management /
TUB FG Siwawi
Gustav-Meyer-Allee 25
13355 Berlin
Tel.: +49 30 314 72247
e-mail: matthias.barjenbruch@tu-berlin.de

Website

https://www.siwawi.tu-berlin.de/menue/forschung/rau/parameter/en/

Partner Institutions

Technical University of Berlin, FG System Dynamics and Friction Physics / TUB FG Reibung

Continental Reifen Deutschland GmbH / Continental

GKD – Gebr. Kufferath AG / GKD

Ingenieurgesellschaft Prof. Dr. Sieker mbH / IPS

WESSLING GmbH / WESSLING

Associated Partners

ADAC e.V. / ADAC

Berliner Stadtreinigung / BSR

Berliner Wasserbetriebe / BWB