Stakeholder

Eine Kreislaufwirtschaft für Kunststoffe – Aktuelle Diskussionen, Trends und politische Herausforderungen

linda.mederake@ecologic.eu — Wed, 23 Feb 2022 12:59:35 +0000

A circular plastics economy - Current discussions, trends and political challenges linda.mederake… Wed, 02/23/2022 - 13:59

Untertitel

A reflection of the Tutzing Symposion 2021 „Polymers for a better life and circular economy“

Titelbild

Beschreibung

The article reflects on the 59th Tutzing Symposion entitled "Polymers for a better life and circular economy" that took place as an online event in October 2021. Based on the presentations at the symposium, the contribution provides an overview of current debates on the circular plastics economy, as well as insights into existing political regulations, present challenges, and possible future developments with regard to this major societal project.

Among other topics, the article addresses the comparability of life cycle assessments, (chemical) recycling, and challenges in developing new business models. It also addresses the material and political limits of the circular economy and criticizes attempts to locate the responsibility for solving the plastic problem mainly in the individual behavior of citizens. Looking at existing regulations and policy initiatives at national, European and international levels, the article states the lack of a holistic, overarching approach. The article concludes with an appeal for more exchange and discussions between industry, politics and authorities as well as civil society in the political decision-making process.

Further Links

Article (restricted access)

DOI

https://doi.org/10.37307/j.1863-9763.2022.02.05

Magazine

Müll und Abfall

Year

2022

Author

Linda Mederake

Publisher

Erich Schmidt Verlag (ESV), Germany

Type of Result

(scientific) publications (peer-review, essays, book chapters, poster etc.)

Citation

Mederake, Linda (2022): Eine Kreislaufwirtschaft für Kunststoffe – Aktuelle Diskussionen, Trends und politische Herausforderungen. Eine Reflexion des Tutzing Symposions 2021 „Polymers for a better life and circular economy“. In: Müll und Abfall, 54 (2), 77-83.

Tags

Waste reduction

Social perception

Governance

Industry

Consumption

Strategy on plastics

Life Cycle Assessment

Environmental accounting

Reduction of plastic use

Prevention of plastics

Recycling

Regulation

Resource conservation

Publikationstyp

Factsheet 2: Wertvoller Alt-Kunststoff - Schwimmende Recyclinganlage verwertet Plastik bevor er ins Meer gelangt

janna.vakili@ecologic.eu — Fri, 05 Mar 2021 09:18:56 +0000

Factsheet 2: Valuable waste plastic - Floating recycling plant recovers plastics before they enter the sea janna.vakili@e… Fri, 03/05/2021 - 10:18

Titelbild

Beschreibung

In this factsheet, joint project KuWert shows how plastic recycling can be profitable. The research team developed a floating recycling platform, mobile and independent of local structures. The system was tested in coastal cities in West Africa, where a lot of plastic ends up in the sea.

Since high-quality plastic recyclate can only be obtained from clean and pre-sorted old plastic, the team worked with a large number of plastic collectors on land and processors on board. This not only created employment, but also prevented over 60,000 tons of plastic per year from ending up in the oceans. At the same time, value chains were established and a contribution made to climate protection.

The contents of the factsheet are based on research results of the joint project KuWert "Ship-based treatment of plastics for the implementation of value chains". It is available here for PDF download.

Attachments

Factsheet 2 of the BMBF Research Focus Plastics in the Environment.

Further Links

Verbundprojekt KuWert

Joint project

KuWert

Year

2021

Author

Fridtjof Rohde

Type of Result

factsheets

Citation

Rohde, Fridtjof (2021): Valuable waste plastic: Floating recycling plant recovers plastics before they enter the sea. Fact sheet 2 of the BMBF research focus „Plastics in the Environment“.

Publikationstyp

Ergebnis

MaReK Stakeholder Workshop on Tracer Based Sorting for Plastic Packaging

linda.mederake@ecologic.eu — Mon, 15 Apr 2019 13:31:18 +0000

MaReK Stakeholder Workshop on Tracer Based Sorting for Plastic Packaging linda.mederake… Mon, 04/15/2019 - 15:31

Titelbild

Location

Freiburg

Joint Project

MaReK

Date

24 September 2019

Event type

Joint Project Event

Image Gallery

Tags

Stakeholder

Fluorescence marker-based sorting technology

Marker system

Date sort

Tue, 09/24/2019 - 12:00

Hide on overview

Aus

Stakeholder-Dialog

linda.mederake@ecologic.eu — Tue, 04 Dec 2018 10:37:38 +0000

Stakeholder Dialogue linda.mederake… Tue, 12/04/2018 - 11:37

Titelbild

Beschreibung

As part of the joint research project "PlastikBudget - Development of budget approach and LCA impact assessment methodology for the governance of plastics in the environment", the Kulturwissenschaftliches Institut Essen and Frauenhofer UMSICHT are organising a stakeholder dialogue in Berlin on Monday and Tuesday, 18 and 19 February 2019.

The stakeholder dialogue will bring together representatives from environmental NGOs/civil society, science, industry and politics to discuss plastics issues. The following questions, among others, will be discussed with a total of around 30 stakeholders: What is an acceptable amount of plastics in the environment? What can companies and associations do and what do they do to reduce plastic waste emissions (given certain political conditions)? What communication and implementation strategies are proposed for a plastics budget and what are their chances of success?

Location

Berlin

Organiser

Kulturwissenschaftliches Institut Essen

Fraunhofer UMSICHT

Joint Project

PlastikBudget

Date

18 - 19 February 2019

18. - 19. Februar 2019

Event type

Joint Project Event

Image Gallery

Tags

Date sort

Mon, 02/18/2019 - 12:00

Hide on overview

Aus

Offene Konsultation der EU-Kommission zur Kunststoffstrategie

hannes.schritt@ecologic.eu — Wed, 24 Jan 2018 09:22:04 +0000

Consultation about Reducing Marine Litter: Action on Single Use Plastics and Fishing Gear hannes.schritt… Wed, 01/24/2018 - 10:22

Further Links

Strategy on plastics of the European Union

Beschreibung

Till the 12th of February 2018 General public, business associations, companies, researchers and experts, NGOs, international organisations and institutions, fishermen and fisheries organisations are invited to provide input, opinions and data for preparation of follow-up to the strategy on plastics related to marine litter, particularly from single use plastics and fishing gear.

The questionnaire is available here.

Related website of the European Union can be visited here.

Tags

Hide on overview

Aus

MicroCatch_Balt

KALEH — Wed, 20 Dec 2017 09:57:04 +0000

MicroCatch_Balt KALEH Wed, 12/20/2017 - 10:57

Investigation of Sinks and Sources of Microplastics from a Typical Catchment Area to the Open Baltic Sea

This project determined sources and sinks of microplastic in the Warnow river basin, as well as relevant dissemination processes on its way to the open Baltic Sea. Separate models were linked so that the resulting model covers the entire river basin including estuary and coastal waters. The linked models served to identify hotspot areas of microplastic entry and to estimate the effects of microplastic reduction measures in parts of the river basin. By converting the models into a handson multitouch table, project participants made interactive, creative learning modules that were presented in the form of a traveling exhibition in communities around the German Baltic coast from Stralsund to Flensburg. Further, MicroCatch_Balt included the examination of anti-fouling paint and extreme weather events as sources and higher organisms as sinks. Based on this, MicroCatch_Balt covered the most important aspects of microplastic contamination of limnic to marine systems in northern Germany, thereby offering interest groups the expertise with which to develop future monitoring and strategies for reduction.

Main areas of work

Sampling in the Warnow river basin and estuary, extraction and identification of microplastics
Modelling of microplastic input into the Warnow system of diffuse and point sources
Development of two multi-media modules for a multi-touch table and organisation of a traveling exhibition

Arbeitspakete

Work packages

WP 1 Sampling of microplastic from the environment

Contact person
PD Dr. habil. Matthias Labrenz, Leibniz Institute for Baltic Sea Research, Environmental Microbiology, Seestraße 15, 18119 Rostock, e-mail: matthias.labrenz@io-warnemuende.de

Project partner
IPF

Short description
In WP 1, environmental samples (water, sediment, soil, benthic and pelagic higher organisms) were collected, processed and identified in the Warnow area. Of particular interest were potential sources such as wastewater treatment plants / sewage separation, drainage ditches, erosion areas, industrially influenced areas as well as extreme events like Hanse Sail, New Year‘s Eve, heavy rain and storm events. Potential sinks, including higher organisms (mussels, worms, fish), beaches and sediments were also sampled. In all samples, the microplastic particles were identified and quantified using spectroscopic methods.

WP 2 Modelling of the Warnow estuary and the catchment area

Contact person
Dipl.-Ing.agr. Peter Kreins, Johann Heinrich von Thünen Institute - Federal Research Institute for Rural Areas, Forestry and Fisheries, Bundesallee 50, 38116 Braunschweig, e-mail: peter.kreins@thuenen.de

Project partner
FZJ, IOW

Short description
By adapting and combining different regional models, spatially high-resolution modelling of landside diffuse and point source of microplastic emissions into the river basin of the Warnow took place. In this way, on the one hand the hotspots of pollution in the Warnow river area were identified and on the other hand the entire landside microplastic entries into coastal waters were quantified.

WP 3 Microplastics Touring Exhibition

Contact person
Dr. Barbara Hentzsch, Leibniz Institute for Baltic Sea Research Warnemünde, Scientific Management and Communication, Seestraße 15, 18119 Rostock, e-mail: barbara.hentzsch@io-warnemuende.de

Project partner
FhIGD

Short description
In WP 3 a traveling exhibition with an interactive multimedia learning module was developed, which presents the project results in the form of animations. The traveling exhibition was shown in Stralsund, Rostock, Hamburg, Kiel, Eckernförde and Flensburg. The respective exhibition openings was accompanied by plenary discussions with representatives of the local environmental authorities and scientists.

WP 4 Project management

Contact person
PD Dr. habil. Matthias Labrenz, Leibniz Institute for Baltic Sea Research, Environmental Microbiology, Seestraße 15, 18119 Rostock, e-mail: matthias.labrenz@io-warnemuende.de

Short description
WP 4 covered project management and ensured efficient and productive execution of the project. The tasks of WP 4 included coordination with the other “Plastics in the Environment” projects PLAWES, PLASTRAT and the BONUS project MICROPOLL, as well as monitoring finances and work results, organising regular project meetings, disseminating project results to the public, and supporting the project manager with regard to internal and external scientific communication.

Coordinator

PD Dr. habil. Matthias Labrenz
Leibniz Institute for Baltic Sea Research Warnemünde / IOW,
Environmental Microbiology
Seestraße 15
18119 Rostock
Phone: +49 381/5197378
e-mail:matthias.labrenz@io-warnemuende.de

Website

https://www.io-warnemuende.de/microcatch-home.html

Partner Institutions

Leibniz Institute of Polymer Research Dresden / IPF

Jülich Research Centre, Institute for Bio- and Geosciences / FZJ-IBG

Johann Heinrich von Thünen Institute - Federal Research Institute for Rural Areas, Forestry and Fisheries / TI-LR

Fraunhofer Institute for Computer Graphics Research IGD Rostock / FhIGD

Duration Period

August 2017

April 2021

Tags

Information and teaching materials

Infraref spectroscopy

Sewage treatment plant

Combined sewar overflows

Project sheet

19_Projektblatt_MicroCatchBalt_ENG_2018.pdf

Koordinator label

Coordinator

PLAWES

KALEH — Wed, 20 Dec 2017 09:29:04 +0000

PLAWES KALEH Wed, 12/20/2017 - 10:29

Microplastic Contamination in the Weser- Wadden Sea – National Park Model System: an Ecosystem-Wide Approach

In PLAWES, the modelling system of the German national park Weser-Wadden Sea was the first large European river basin that was investigated in detail regarding its microplastic pollution. PLAWES conducted a pioneering study of the microplastic contamination from the headwaters to the North Sea (northern Atlantic Ocean) that comprised an interdisciplinary and integrated ecosystem approach and accounted for various point sources (wastewater treatment plants, separation systems) and diffuse sources (drainage, atmosphere) of pollution. The results were integrated into a model for identifying primary transport mechanisms and accumulation zones. The research investigated the effects of microplastics on ecosystems in the Weser-Wadden Sea system by analysing the interaction of microplastic with pathogens in biofilm and aquatic invertebrates. Outcomes of this particularly ecologically relevant aspects were used to estimate the environmental risk of microplastics for the model system, and subsequently made it transferable to other systems. In addition, the results of the analysis became part of new teaching materials in order to provide a knowledge platform for teachers, students, and parents across Europe. PLAWES generated unique data about the effects of microplastics on a large European river basin and its environment. This is significant not only for policymakers and stakeholders but also as a fundament for science-based solutions to address the microplastics problem.

Main areas of work

Microplastics in the Weser-Wadden Sea
Model-based balancing of diffuse and point sources of microplastic entries
Interaction of microplastics with pathogens and biota
Training measures to raise awareness of plastic waste

Arbeitspakete

Work packages

WP 0 Management, communication and dissemination

Contact person
Prof. Dr. Christian Laforsch, University of Bayreuth, Universitätsstraße 30, 95447 Bayreuth, e-mail: christian.laforsch@uni-bayreuth.de

Project partner
AWI

Short description
WP 0 ensured the targeted and efficient support of the consortium with regard to project management, communication and dissemination. WP 0 coordinated both the public relations work and the exploitation of the results achieved. WP 0 continued to coordinate the cooperation of all project partners and was therefore in close contact with all project partners. WP 0 coordinated the harmonisation with the joint research project MicroCatch_Balt with regard to sampling and processing, modelling, public relations, and data storage as well as communication with the other projects.

WP 1 Microplastics in the Weser-Wadden Sea model system

Contact person
Dr. Gunnar Gerdts, Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research, Kurpromenade, 27498 Helgoland, e-mail: gunnar.gerdts@awi.de

Project partner
UBT, UOld

Short description
The aim of WP 1 was to investigate the entire Weser river system into coastal waters with regard to microplastic pollution. The final determination of the exact sampling points was carried out taking into account the real data required for RAUMISmGROWA- MePhos and "Tidal Model" (WP 3). The entire Weser including the Lower Weser and the Wadden Sea was investigated with regard to exposure to microplastic. Two campaigns were carried out at different seasons with different water conditions on the Weser.

WP 2 Entry points – point sources and diffuse entry

Contact person
Prof. Dr. Andreas Held, University of Bayreuth, BayCEER; second affiliation: Technical University of Berlin, Department of Environmental Chemistry and Air Pollution Control, Straße des 17. Juni 135, 10623 Berlin, e-mail: held@tu-berlin.de

Project partner
AWI

Short description
The aim of WP 2 was an exemplary consideration of the input paths for microplastics by investigation of important point sources such as wastewater treatment plants and separation water sewer systems as well as the diffuse input from drains and atmosphere. For this purpose, selected sampling points in the Weser river basin were characterised taking into account different landscape areas and land use types. The focus lay on quantifying the entry points of microplastics. Sampling was synchronised with the campaigns at the Weser.

WP 3 Model-based accounting of diffuse and point-shaped MP entries

Contact person
Prof. Dr. Frank Wendland, Jülich Research Centre IBG-3, Wilhelm-Johnen-Straße, 52428 Jülich, e-mail: f.wendland@fz-juelich.de

Project partner
TI, NLWKN

Short description
The aim was a spatially resolved quantification of the microplastic emissions from diffuse and point sources and the identification of spatial load centres and accumulation zones within the river basin and estuary. The microplastic entries were modelled from different types of diffuse entry points and point sources. The work was based on the models mGROWA, MEPhos, RAUMIS, as well as a transport modelling considering the estuarine hydro- and sediment dynamics. Within the framework of the project, the model chain was improved in a targeted manner according to microplastic entry modelling in the inland and the further distribution of the microplastics in the lower reaches, estuary and apron.

WP 4 Interaction of microplastic with pathogens and biota

Contact person
Prof. Dr. Jörg Oehlmann, Goethe University Frankfurt, Max-von-Laue-Straße 13, 60438 Frankfurt am Main, e-mail: oehlmann@bio.uni-frankfurt.de

Project partner
AWI, UBT, UOld

Short description
In WP 4, the ecosystem effects of microplastic on the Weser-Wadden Sea model system were described on the basis of the two ecologically relevant aspects "Interaction with pathogens and antimicrobial resistance" and "Interaction with aquatic invertebrates".

Interaction with pathogens and antimicrobial resistance: Since biofilms are sites of increased genetic exchange and increased antimicrobial resistance occurs below wastewater treatment plants, plastics could not only contribute to the dispersion of pathogenic organisms, but also of resistance genes. The consequences of such a transfer were previously unknown. AWI therefore used molecular microbial source tracking techniques (DNA/RNA arrays for the detection of pathogenic bacteria, viruses, protozoa and virulence/resistance genes) to investigate plastic samples from the Weser region. Interaction with aquatic invertebrates: In order to generate exposure data, different mollusk species were applied in situ in the Weser, the tidal area and the Wadden Sea. Absorbed microplastic was examined in the digestive tract and in tissue samples and confirmed in parallel by pyrolysis-GC-MS and spectroscopic methods. Historical mussel samples (since 1986) from the Federal Environmental Specimen Bank (UBA) were examined using pyrolysis-GC-MS. The chronic toxicity of microplastic is characterised in laboratory experiments with mussels and worms. Different polymers were conditioned in situ and toxicologically characterised in chronic exposure experiments.

WP 5 Training measures to raise awareness of plastic waste

Contact person
Prof. Dr. Franz X. Bogner, University of Bayreuth, Didactics of Biology, Universitätsstraße 30, 95447 Bayreuth, e-mail: franz.bogner@uni-bayreuth.de

Project partner
AWI, UOld

Short description
In addition to the ethical assessment skills of students, WP 5 incorporated existing individual environmental knowledge. Innovative teaching materials with a sound reference to everyday life were evaluated for a holistic understanding regarding the burden of plastics in the model system and disseminated via an Internet teaching/learning portal. Within the work package, UBT provided a handbook for teachers and "public relations workers".

Coordinator

Prof. Dr. Christian Laforsch
University of Bayreuth
Chair of Animal Ecology I / UBT
Universitätsstraße 30
95447 Bayreuth
Phone: +49 921 / 55-2651
e-mail: christian.laforsch@uni-bayreuth.de

Dr. Gunnar Gerdts
Alfred Wegener Institute
Helmholtz Centre for Polar and Marine Research (AWI)
Kurpromenade
27498 Helgoland
Phone: +49 4725 / 819-3245
e-mail: gunnar.gerdts@awi.de

Website

http://www.bayceer.uni-bayreuth.de/PLAWES/en/

Partner Institutions

Coast Research Centre at the Lower Saxony State Enterprise for Water Management, Coastal Protection and Nature Conservation / NLWKN

Jülich Research Centre / FZJ

Goethe University Frankfurt / GU

Johann Heinrich von Thünen Institute - Federal Research Institute for Rural Areas, Forestry and Fisheries / TI-LR

Carl von Ossietzky University of Oldenburg, Institute of Chemistry and Biology of the Sea / UOld

Duration Period

September 2017

April 2021

Tags

Sewage

Methodology of analyses

Information and teaching materials

Infrared

Infraref spectroscopy

Sewage treatment plant

Sewage sludge

Municipality

Communication strategy

Combined sewar overflows

Prevention of plastics

Polyamide (PA)

Polyester

Polyethylene (PE)

High density polyethylene PE-HD

Polyethylene terephthalate (PET)

Polyvinyl chloride (PVC)

sampling

Sample purification

Pyrolysis GC

Raman microspectroscopy

Environmental sustainability

Scanning electron microscopy

Plasticiser

Project sheet

18_Projektblatt_PLAWES_ENG_2018.pdf

Koordinator label

Coordinator

MicBin

KALEH — Wed, 20 Dec 2017 09:13:16 +0000

MicBin KALEH Wed, 12/20/2017 - 10:13

Microplastics in Inland Waters – Investigation and Modeling of Entries and Whereabouts in the Danube Area as a Basis for Action Planning

Within the framework of this project, a first-ever accounting of macro-, meso- and microplastics released into the German part of the Danube river basin was achieved, with measuring stations at its main tributaries. Microplastic particles (particles < 5 mm) were examined by using various, complementary analytical methods. The focus lay on specifically small particles that are invisible to the naked eye with diameters less than 300 μm as there is currently a distinct lack of data about these particles. This project mapped the sources, sinks, transport processes and fragmentation of plastics in separate material flow models for micro- and macroplastics. Targeted, standardised sampling and supplementary laboratory experiments are clarifying the relevance of previously neglected input paths such as agricultural land or atmospheric deposition. Results were implemented into existing models, the models were validated and a plastic balance for the German Danube watershed was prepared. Through scenario analyses, it was possible to identify measures to reduce plastic pollution at the level of entire river basins.

Main areas of work

Entry balancing of macro-, meso- and particularly microplastic in the German Danube river basin through uniform sampling campaigns, modelling and supplementary laboratory tests
Balancing of previously unconsidered sources and sinks, such as the input of plastic by agriculture, atmospheric deposition of microplastic and degradation processes of plastics in the environment
Derivation of minimisation strategies

Arbeitspakete

Work packages

WP 1 Coordination

Contact person
Dr. Nicole Zumbülte, TZW: DVGW Water Technology Centre, Analysis and Water Quality department, Karlsruher Straße 84, 76139 Karlsruhe, e-mail: nicole.zumbuelte@tzw.de

Project partner

UOS, UniA, BfG, THK, LfU, BKV

Short description
The TZW was responsible for the scientific and general internal coordination within the project, ensured the exchange of information between the internal and external partners and research networks. This included the organisation of sampling campaigns and sample distribution to the individual partners, the coordination of sample analysis, the organisation of project meetings for exchange between the partners and the maintenance of scientific exchange with other projects at national and international levels.

WP 2 Analysis of plastics in environmental samples

Contact person
Prof. Dr. Thomas Ternes, German Federal Institute of Hydrology (BfG), Am Mainzer Tor 1, 56068 Koblenz, e-mail: ternes@bafg.de

Project partner
LfU, TZW, UOS

Short description
In this work package, the samples from WP 3 and WP 4 were analysed using three complementary methods. Starting from a high sample volume, these were pre-selected in advance by BfG using an effective screening procedure (low sample preparation effort, sample analysis using pyrolysis gas chromatography coupled with mass spectrometry). Samples with contents above a threshold value to be defined were subjected to a much more complex and precise analysis using Raman (TZW) and IR spectroscopy (LfU). These processes provided detailed information on particle properties (concentration, size, polymer type, and shape).

WP 3 Identification of entries / sources

Contact person
Dr. Korbinian Freier, Bavarian State Office for the Environment, Demollstr. 31, 82407 Wielenbach, e-mail: korbinian.freier@lfu.bayern.de

Project partner
THK, BKV, UOS

Short description
The first step in mass balancing of the selective and diffuse input of microplastics requires a characterisation of all potential sources. The aim of WP 3 was therefore to investigate and quantify entries from points and areas in limnic systems. The results were incorporated in WP 5. The focus was on atmospheric deposition, linear inputs in connection with littering, wastewater treatment plants, landfill leachates, and the weathering of plastics.

WP 4 Transport, distribution and fate: Process understanding of water, soil, air

Contact person
Prof. Dr. Thomas Ternes, German Federal Institute of Hydrology (BfG), Am Mainzer Tor 1, 56068 Koblenz, e-mail: ternes@bafg.de

Project partner
BKV, LfU, UniA, TZW, UOS, THK

Short description
In addition to sinks such as hydroelectric power plants, this WP looked at transport and relocation processes of microplastics and possible intermediate reservoirs for microplastics such as soils or water sections with low flow. In addition, degradation and comminution processes of plastics were investigated in laboratory experiments. Sinks or reservoirs for microplastics were identified by coordinated sampling in the water body and mass balancing of a water body section. The results of WP 4 were incorporated into the models of WP 5.

WP 5 Drawing up balance sheets by modelling and deriving measures

Contact person
Dr. Jörg Klasmeier, Osnabrück University, Institute of Environmental Systems Research, Barbarastraße 12, 49078 Osnabrück, e-mail: jklasmei@uos.de

Project partner
LfU, UniA, BKV, TZW

Short description
Entries in water bodies were accounted for considering the various sources and sinks and allowing for an estimation of the total freight in the Danube River System. Process-oriented small to medium scale models for microplastic (UniA, UOS) and supraregional models for micro-, meso- and macroplastic (BKV) were fed with the experimental data and existing data on wastewater treatment plants (LfU, UOS) obtained in the various work packages. From the results of all work packages, a summary evaluation of the sources and sinks with recommendations for measures to reduce water pollution was carried out.

WP 6 Communication

Contact person
Dr. Nicole Zumbülte, TZW: DVGW Water Technology Centre, Analysis and Water Quality Department, Karlsruher Straße 84, 76139 Karlsruhe, e-mail: nicole.zumbuelte@tzw.de

Project partner
LfU, THK

Short description
The MicBin project homepage informs about project contents, actions and results. In addition, a short film was produced and made available to the public. The public was made aware of this issue through a waste collection campaign on the water and participation in the German Sustainability Action Days (DAN). Stakeholders from research, authorities and industry was informed and involved in workshops.

Case Studies

The MicBin project focused on balancing the input of macro-, meso- and particularly microplastics for the German Danube river basin with measurement campaigns at the main Danube tributaries. Among other things, agricultural entries as well as transport and relocation processes were also taken into account.

Coordinator

Dr. Nicole Zumbülte
DVGW Deutscher Verein des Gasund Wasserfaches e. V. – Technischwissenschaftlicher Verein – Bonn
TZW: DVGW-Water Technology Centre, Analysis and Water Quality Department
Karlsruher Straße 84
76139 Karlsruhe
Phone: +49 721-9678 139
e-mail: nicole.zumbuelte@tzw.de

Website

https://www.micbin.de/

Partner Institutions

German Federal Institute of Hydrology (BfG) / BfG

DVGW-Technologiezentrum Wasser / TZW

Cologne Technical University, STEPs / THK

BKV GmbH / BKV

Bavarian State Office for the Environment / LfU

University of Augsburg / UniA

Osnabrück University / UOS

Duration Period

October 2017

March 2021

Tags

Microplastics

Catchment area

Modeling

minimization strategies

Infraref spectroscopy

Sewage treatment plant

Project sheet

17_Projektblatt_MicBin_ENG_2018.pdf

Koordinator label

Coordinator

EmiStop

KALEH — Tue, 19 Dec 2017 16:41:32 +0000

EmiStop KALEH Tue, 12/19/2017 - 17:41

Identification of Industrial Plastic Emissions by Means of Innovative Detection Methods and Technology Development to Prevent the Input into the Environment via the Wastewater Pathway

This project systematically detected emissions of plastics into wastewater from relevant industries. Emissions levels were analysed along all points of the value chain (production, transport, processing, and cleaning of synthetic materials).

The goal was to select wastewater treatment technologies that optimise the reduction of emissions of plastics for the respective value chain. The project evaluated existing technologies for separating particles, investigated deposition rates, and developed approaches for technical optimisation. Optimisation also includes technological developments such as flocculants. Researchers conducted tests in both laboratory and pilot project settings – selected large scale technical wastewater treatment plants were investigated at industrial facilities.

Due to the existing analytical uncertainties, the following detection methods were used to evaluate the existing and developed technologies:

Dynamic differential calometry for qualification and quantification (concentrations)
Raman spectroscopy for qualification and quantification (particle numbers)
Correlations of the plastic concentrations to routine water chemical analyses (for a retrospective estimation of the plastic loads)
Tracer test with magnetic plastic particles (simple and reliable quantification in large dilutions) for balancing in laboratory and pilot tests

Apart from the technical aspects, the focus of this project was also on socio-economic aspects. Thus, measures to prevent economic losses and retain value were reviewed together with the associated industrial enterprises and evaluated with partners from the scientific community and other interest groups.

Main areas of work

Standardisation of sampling and sample preparation for industrial wastewater (in alignment with Plastik-Net and other joint research projects)
Quantitative and qualitative measurement of plastic concentrations in industrial wastewater using Raman spectroscopy and dynamic differential calorimetry
Extended data collection at the sampled industrial waste water treatment plants for the derivation of the plastic loads and testing of a correlation between the measurement results and routine water chemical analyses
Development of magnetic plastic particles in the micrometre range with the physical properties of relevant types of plastic
Development of a tracer test with magnetic plastic particles
Assessment of technologies for particle separation with regard to the retention of (micro-) plastic particles
Optimisation of particle separation technologies
Development of flocculants for the targeted improvement of the retention of individual types of plastics and their mixtures
Delphi surveys of industry and sector associations as well as of politics and science to identify perceived risks and obstacles as well as opportunities and the willingness to participate
Multi-criteria analysis for the development of weighted, ecological and socio-economic criteria for the sustainability assessment of the project results

Arbeitspakete

Work packages

WP 1 Development of analytical methods for plastic particles

Contact persons
Prof. Dr. Jutta Kerpen, RheinMain University, Institute for Environmental and Process Engineering, Department of Wastewater Treatment, Am Brückweg 26, 65428 Rüsselsheim, e-mail: jutta.kerpen@hs-rm.de

Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Prof. Dr.-Ing. Markus Engelhart, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Technology, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: m.engelhart@iwar.tudarmstadt.de

Project partner
EnviroChemie

Short description
A routinely applicable sampling and sample preparation procedure were developed in order to create a uniform and comparable database for industrial wastewater. For the subsequent qualification and quantification of microplastics in (industrial) wastewater samples, the methods of dynamic differential calorimetry and Raman spectroscopy were adapted to industrial wastewater. The respective analysis results were compared with standardised routine measurements and operational self-analysis to determine correlations.

WP 2 Tracer test

Contact persons
Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Dr. Kyriakos Eslahian, BS-Partikel GmbH, Nestléstr. 41, 55120 Mainz, e-mail: eslahian@bs-partikel.de

Short description
In order to balance individual process technologies for plastic particle retention in real water matrices, a method for the quantification of magnetic plastic particles by means of magnetic susceptibility scales was established. For this purpose, particles in the size range from 1 μm to 300 μm were synthesised with the greatest possible magnetic susceptibility, which imitate the morphologies and chemical properties of environmental plastic particles.

Furthermore, a continuous method for the production of these particles was established in order to ensure the best possible reproducibility and scalability for subsequent applications.

WP 3 Identification of industrial entry points

Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Project partner
EnviroChemie, inter 3

Short description
The entry points of microplastics from industrial wastewater into surface waters were determined by uniform characterisation and quantification of the plastic emissions of individual industrial plants. The evaluation of plastic emissions on the basis of mass flows, variations and production information with key figure system and balance tools, hotspots and temporal variations of the particle input were identified.

WP 4 Balancing of technical systems

Contact persons

Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner

TU-AW, inter3, HSRM

Short description
In laboratory and pilot tests, various process techniques (filtration in various filter units such as membrane plants, double-layer filters, cloth filters; flocculation in combination with filtration, flotation or sedimentation) were evaluated with regard to plastic particle removal. For this purpose, the tracer particles developed in WP 2 were used, which enable the use of synthetic and real industrial waste water. Furthermore, the existing industrial process technology was evaluated at different industrial sites and optimised with regard to the separation of plastic particles.

WP 5 Optimisation of plastic retention

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner
TU-AW

Short description
Based on the results of WP 4, the pilot plants were adapted by specific design changes (e.g. flow control, sludge removal, conveyor technology) and the success of these optimisations was evaluated in further balancing experiments. For the industries considered, in addition to constructive optimisation of process engineering, production-integrated measures to reduce plastic emissions were derived. The production information collected in WP 3 served as the basis for this.

WP 6 Development of flocculants for plastics sorts

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner
TU-AT, TU-AW

Short description
In experiments with beakers, individual polymers for the targeted flocculation of particles of different types of plastic in the size range from 10 to 300 μm were tested. The results were then used to test specific blends of polymers to produce the most stable flakes of particles of individual plastic types. With these results, the tests and developments were extended to mixtures of different types of plastics.

The laboratory test results were then supplemented by pilot tests using tracer particles developed in WP 2.

WP 7 Risk and potential analysis

Contact person
Dipl.-Ing. Wolf Raber, inter 3 GmbH - Institute for Resource Management, Otto-Suhr-Allee 59, 10585 Berlin, e-mail: raber@inter3.de

Project partner
TU-AT, TU-AW, EnviroChemie, HSRM, BS-Partikel

Short description
To maximise the broad application of the EmiStop optimisation approaches and avoidance strategies, the risks and potentials were identified from the perspective of the key actors, evaluated and fed into the project at an early degree of technology maturity. Furthermore, an expert-supported set of sociopolitical, economic, and ecological evaluation criteria and a meaningful set of indicators were derived in order to analyse and evaluate the multicriterial optimisation approaches and avoidance strategies and in a next step measures for implementation and diffusion.

WP 8 Management and communication

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com Dr. Anja Steglich, inter 3 GmbH - Institute for Resource Management, 10585 Berlin, e-mail: steglich@inter3.de

Project partner
TU-AT, TU-AW, HSRM, BS-Partikel

Short description
In order to disseminate and implement the project results, industrial companies were actively involved and dialogue is carried out with experts from relevant industry associations (e.g. PlasticsEurope e.V., IK Industrievereinigung Plastikverpackungen e.V., GKV Gesamtverband Plastikverarbeitende Industrie e.V.). The collaboration was commissioned to a) develop the results into a consensual overall perspective, b) prepare these into action-oriented and implementable guidelines and c) make them available via established channels and multipliers, e.g. the Responsible Care Initiative of the chemical industry.

Coordinator

Dr.-Ing. Eva Bitter
EnviroChemie GmbH
In den Leppsteinswiesen 9
64380 Rossdorf
Phone: +49 6154-6998-57
e-mail: eva.bitter@envirochemie.com

Website

http://www.emistop.de/page8.html

Partner Institutions

Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering

Technical University of Darmstadt, Institute IWAR, Department of Wastewater Technology

RheinMain University, Institute for Environmental and Process Engineering / HSRM

inter 3 GmbH-Institute for Resource Management

BS-Partikel GmbH

Duration Period

January 2018

December 2020

Tags

Sewage

Methodology of analyses

Sewage treatment plant

Environmental accounting

Polyethylene terephthalate (PET)

Polymer analysis

Polypropylene (PP)

Polystyrene (PS)

Polyvinyl chloride (PVC)

Project sheet

15_Projektblatt_EmiStop_ENG_2018.pdf

Koordinator label

Coordinator

KuWert

KALEH — Tue, 19 Dec 2017 16:12:48 +0000

KuWert KALEH Tue, 12/19/2017 - 17:12

Ship-Based Treatment of Plastics for the Implementation of Value Chains in Less Developed Countries as well as for the Prevention of Plastic Inputs into the Environment and Especially in Marine Ecosystems

The aim of the project was to develop concepts and preliminary planning for the implementation of an infrastructure for the collection, ship-based treatment, and marketing of plastic waste in order to reduce the input of plastic waste into the environment and marine ecosystems. The project's target regions were primarily less developed countries in the Global South. Using West Africa as an example, strategies for reducing the input of plastics (in this case macroplastics) into the environment were researched, because the input of macroplastics into the environment is particularly high when functioning waste collection and disposal systems are lacking. Stakeholder dialogues were conducted to assess whether a commodity chain based on plastic recyclates is possible on the West African coast. A prototype model ship was developed and used to determine costs.

Main areas of work

Data collection, analysis and evaluation (local conditions in less developed countries)
Preliminary planning of waste treatment plants
Design of a concept for suitable ship and plant technology
Development of strategies for the implementation of value chains in less developed countries
Analysis and evaluation of results (economic, ecological)

Arbeitspakete

Work packages

WP 1 Basic evaluation – recording of plastic waste

Contact person
Dr. Martin Wittmaier, IEKrW, Neustadtswall 30, 28199 Bremen, e-mail: wittmaier-office@hs-bremen.de

Project partner
TECHNOLOG, Nehlsen, University of Mauritius, University of Sierra Leone

Short description
It was of utmost importance for the processing of the entire project to gain knowledge of the composition of the plastic waste that potentially was collected in less developed countries. To this end, data and information (types, qualities, quantities, framework conditions, logistics, etc.) were first collected, analysed and evaluated, including on site in the example countries Sierra Leone and Mauritius.

WP 2 Pre-design of a treatment and recovery plant

Contact person
Dr. Sven Rausch, Nehlsen GmbH & Co. KG, Wilhelm-Karmann-Str. 5, 28237 Bremen, e-mail: sven.rausch@nehlsen.com

Project partner
TECHNOLOG, IEKrW, University of Mauritius, University of Sierra Leone

Short description
In this WP, waste treatment plants were planned in various variants. For this purpose, national and international framework conditions connected with the construction and operation of the ship-based facilities to be developed were determined. Various known procedures were evaluated and tested for their suitability, as were requirements for operation, maintenance and repair. On this basis, the objectives for the treatment of plastic waste were defined, followed by the development of conceptual designs.

WP 3 Concept development (ship and plant engineering)

Contact person
Fridtjof Rohde, TECHNOLOG, Vorsetzen 50, 20459 Hamburg, e-mail: fridtjof.rohde@tlg-services.biz

Project partner
IEKrW, Nehlsen

Short description
Preliminary designs for up to three variants of carrier vessels/semi-submersibles for the treatment of plastic waste were developed with alternative shipbound logistics concepts. Rough planning included room planning and process-oriented arrangement of facilities, equipment for maritime technology, equipment for waste treatment plants, etc. The production costs and energy requirements were also determined and the variants were compared economically.

WP 4 Marketing potential of secondary raw materials

Contact person
Dr. Sven Rausch, Nehlsen GmbH & Co. KG, Wilhelm-Karmann-Straße 5, 28237 Bremen, e-mail: sven.rausch@nehlsen.com

Project partner
IEKrW, TECHNOLOG

Short description
The market for secondary raw materials was examined, since these are fundamentally valuable. Tradeable products from plastic waste were identified and the quality requirements to be met specified. Possible revenues were also estimated. The resulting technical requirements for processing technology and quality management were taken into account in the other WPs. Based on the results, strategies for the most economical processing and marketing of products made from plastic waste were developed.

WP 5 Profitability analysis and life cycle assessment

Contact person
Dr. Martin Wittmaier, IEKrW, Neustadtswall 30, 28199 Bremen, e-mail: wittmaier-office@hs-bremen.de

Project partner
TECHNOLOG, Nehlsen

Short description
The concepts and preliminary planning for the ship-based collection, processing and marketing of plastic waste from less developed countries developed in the project were evaluated under economic and ecological aspects. On the basis of the results, the ecological advantages (reduction of the input of plastics into the environment, protection of resources by recycling plastic waste) were determined. The evaluation of the economic efficiency was intended to assess the chances of realisation and provide a planning framework for potential investors, funding providers and operators of a ship-based collection and treatment plant for plastic waste.

WP 6 Project management, public relations, recycling concept

Contact person
Fridtjof Rohde, TECHNOLOG, Vorsetzen 50, 20459 Hamburg, e-mail: fridtjof.rohde@tlg-services.biz

Project partner
IEKrW, Nehlsen

Short description
Within the framework of WP 6, work was carried out on internal and external communication (project meetings, workshops, communication between national and international partners including maintaining contacts with interested shipping companies/shipowners, public relations, etc.) and project management (administrative and content-related reporting, work and progress control and coordination, etc.).

Coordinator

Fridtjof Rohde
TECHNOLOG Services GmbH
Vorsetzen 50
20459 Hamburg
Phone: +49 40 7070768-20
e-mail: fridtjof.rohde@tlg-services.biz

Website

http://www.KuWert.hs-bremen.de

Partner Institutions

Hochschule Bremen – City University of Applied Sciences, Institute for Energy, Recycling and Environmental Protection / IEKrW

Nehlsen GmbH & Co. KG

Duration Period

August 2017

December 2019

Tags

Waste reduction